ショップ情報

WEBショップの店頭受け取りについて現在、WEBショップの発送倉庫のみとなっております。店頭での商品受け取りは対応しておりませんのでご了承ください。

Home > ROBOTIS > DYNAMIXEL XL430-W250-T

ROBOTIS

拡大表示

DYNAMIXEL XL430-W250-T

￥6,831.-(税込)

数量:

＜特徴＞
ローコスト、エントリーモデル、360度動作、車輪モード搭載

DYNAMIXEL(ダイナミクセル)はPCやマイコンから制御できるデジタルコマンド式のサーボモータです。
ROSをはじめとした言語、環境で開発するためのSDK、パッケージなどをメーカー公式で配布しています。
XL430-W250-Tは、TurtleBot3 Burgerに採用されています。

Features

DYNAMIXEL is a robot exclusive smart actuator with fully integrated DC Motor + Controller + Driver + Sensor + Reduction Gear + Network in one DC servo module.

The DYNAMIXEL XL series adopts new features that allow 360 degrees control mode with its contactless magnetic encoder and hollow back case assembly structure. The XL series has the same mechanical structure as the XM430 and XH430 and is compatible with the respective models.

1. Various Operating Modes

(Velocity Control, Position Control, Extended Position Control, PWM Control)

2. Profile Control for Smooth Motion Planning

3. Hollow Back Case Minimizes Cable Stress (3-way-routing)

4. Direct Screw Assembly to the Case (without Nut Insert)

5. Energy Saving with Reduced Current

Package Components

XL430-W250-T

HN11-N101 (Pre-assembled)

Robot Cable-X3P 180mm

Bolt (M2.6*5) TAP

Bolt (M2*5)

Bolt (PHS M2.5x14)

Spacer

Not included Idler Set (HN11-I101 Set)

Compatible Products

Controller : OpenCM9.04 485 Expansion Board, OpenCR1.0

Interface : USB2Dynamixel, U2D2

Various Cabling Methods

Factory Default Settings

ID : 1

Baud Rate : 57600bps

(User can change various settings including ID and baud rate according to environment)

Caution

DYNAMIXEL-X Series cable assembly through hollow case

Organize the entangled cable before assembling the back case.

Do not assemble the back case with entangled cable. The entangled cable can be squashed by the case and cause communication error.

If you use two cables through the hollow case, the cables will be damaged.

Use only one cable through the hollow case.

The DYNAMIXEL-X Series adopted a new gold-plated JST connector for secure and reliable communication.

The connector used for the previous DYNAMIXEL is Molex.

To control DYNAMIXEL-X Series actuators via OpenCM or USB2Dynamixel, please use the JST-Molex Convertible Cable enclosed in the package.

However, the Molex-JST convertible cable is NOT included in the XL430 model.

Please purchase a convertible cable when using a controller and interface that supports the JST connector.

Controller Model	Controller Connector	Cable	DynamixelX Connector	Dynamixel Communication
OpenCM+485 Expansion Board	Molex (3P, 4P)	Robot Cable-X3P 180mm (Convertible)	JST-3P	TTL
USB2Dynamixel	Molex (3P, 4P)	Robot Cable-X3P 180mm (Convertible)	JST-3P	TTL
OpenCR1.0	JST (3P, 4P)	Robot Cable-X3P (by length)	JST-3P	TTL
U2D2	JST (3P, 4P)	Robot Cable-X3P (by length)	JST-3P	TTL
OpenCM+485 Expansion Board	Molex (3P, 4P)	Robot Cable-X4P 180mm (Convertible)	JST-4P	RS-485
USB2Dynamixel	Molex (3P, 4P)	Robot Cable-X4P 180mm (Convertible)	JST-4P	RS-485
OpenCR1.0	JST (3P, 4P)	Robot Cable-X4P (by length)	JST-4P	RS-485
U2D2	JST (3P, 4P)	Robot Cable-X4P (by length)	JST-4P	RS-485

Specification

Model Name		XL430-W250-T
MCU		Cortex-M3 (72 [Mhz], 32 [bit])
Input Voltage	Min. [V]	6.5
	Recommended [V]	11.1
	Max. [V]	12.0
Performance Characteristics	Voltage [V]	12.0
	Stall Torque [N·m]	1.50
	Stall Current [A]	1.4
	No Load Speed [rpm]	61.0
	No Load Current [A]	0.15
Continuous Operation	Voltage [V]	-
	Torque [N·m]	-
	Speed [rpm]	-
	Current [A]	-
Resolution	Resolution [deg/pulse]	0.0879
	Step [pulse]	4
	Angle [degree]	360
Position Sensor		Contactless absolute encoder (12Bit, 360 [deg]) Maker : ams(www.ams.com), Part No : AS5601
Operating Temperature	Min. [°C]	-5
Operating Temperature	Max. [°C]	72
Motor		Cored
Baud Rate	Min. [bps]	9,600
Baud Rate	Max. [bps]	4,500,000
Control Algorithm		PID
Gear Type		Spur
Gear Material		Engineering Plastic
Case Material		Engineering Plastic
Dimensions (WⅹHⅹD) [mm]		28.5 X 46.5 X 34.0
Dimensions (WⅹHⅹD) [inch]		1.12 X 1.83 X 1.34
Weight [g]		0.00
Weight [oz]		2.02
Gear Ratio		258.5 : 1
Command Signal		Digital Packet
Protocol Type		Half duplex Asynchronous Serial Communication (8bit, 1stop, No Parity)
Link (Physical)		TTL Level Multi Drop Bus
ID		0 ~ 252
Feedback		Position, Velocity, Load, Realtime tick, Trajectory, Temperature, Input Voltage, etc
Protocol version		1.0 2.0(Default)
Operating Mode / Angle		Velocity Control mode：Endless turn Position Control Mode：360 [deg] Extended Position Control Mode：±256 [rev] PWM Control Mode：Endless turn
Output [W]		-
Standby Current [mA]		52