ROBOT SERVO RS318CD

＜SPEC＞
Torque: 5.5 [kgf ・ cm]
Speed: 0.16 [s / 60 °]
Weight: 19 [g]
Dimensions: 35.8 x 19.6 x 25.0 mm
Power supply voltage: 6.0-8.4 [V]
Movable range: 300 [deg]
Communication format: TTL half-duplex communication (PWM method not supported)
Please refer to the instruction manual for dimensions and mounting hole positions.
* RS318CD is a command method only and does not support the PWM method.

・RS318CD取扱説明書（Ver.1.00）（2.24MB)
・外形データ


RS318CD (TTL command method) is the same type as the servo used in Robi 2.
The connector is equipped with two ADH connectors and can be connected in a daisy chain, and the same hub and harness as the RS204MD can be used.